Hoyt powermax draw length chart

In 2003, Hoyt revolutionized the archery industry with the introduction of the Cam and 1/2 performance system. With the Cam and 1/2 bows, Hoyt shooters have won several national and international tournaments through the ability to precisely tune the bow for improved accuracy. Hoyt has several different models of the Cam and 1/2 system, including M4, XTR, Spiral X, Z3, C2 and Versa. Every model uses the same basic process for tuning. It may take several attempts before the bow is perfectly tuned.

Put the bow into a bow press. Compress the limbs to loosen the string and cables. Measure each cable and twist the cable until it measures 1/8 inch shorter than the listed lengths (see Resources). For example, the listed length for the 2010 Maxxis 31 with the Z3 cam is 31.25 inches. Double-check to make sure the ends of the cable are straight where the serving wraps around the cable.

Repeat step 1 for the string. Twist the string until it is 3/16 inch shorter than the listed length in the specs. For the same Maxxis 31, the specs call for the string to be stretched to 45.25 inches. Put the twisted cable and string back on the bow and release the bow press.

Tighten the limb bolts with the allen wrench and check the performance marks on the cam. These marks are two circles with lines through them to indicate where the string needs to be positioned. Adjust the control cable until the string lines up with the performance marks.

Check the brace height measurement. The brace height is measured from the bow string to the bow grip. On the Maxxis 31 with the Z3 cam, the brace height is 6.5 inches. To adjust the brace height, place the bow back into the bow press and twist the string.

Check the draw stop timing. As you pull the bow to full draw, have someone watch the cams as they roll over right before full draw. The cable should hit both draw stops--one on the top cam and one on the bottom cam--at the same time. If the bottom draw stop is hitting before the top, the top cam is under-rotated. In this case, you can add a twist to the buss cable or remove a twist to the control cable. If the top cam is over-rotated, take a twist out of the buss cable or twist the control cable.

Measure the draw length. Draw the bow until at full draw and have someone measure from the nock groove on the string to the pivot point of the grip. If the draw length is too long, add a twist to the string and take a twist out if the draw length is too short. Approximately five twists will adjust the draw length 1/4 inch.

Tips

If something goes wrong during any step, start over with step 1. Contact a local archery pro shop for any detailed questions. Routinely tune your bow throughout the year to maintain accuracy. Make small adjustments while twisting the strings and cables.

Tips

Writer Bio

The Hoyt PowerMax is jam packed with all of Hoyt's high end features but comes in at a price that doesn't break the bank.

One cam with a pivoting module creates a draw-length range from 24 inches right up to 30 inches making the PowerMax an extremely versatile bow!

With a mass weight of 3.8 pounds, this bow will work for a budding archer or the most experienced bowhunter around.

The PowerMax is shooting a respectable 328fps with a brace height of 6.75 inches.

Arguably the best bow for the buck, the PowerMax brings you the perfect mix of technology, performance, style and value. Powered by the new PowerMax cam, this sleek bow features a Split-Limb design on a Hoyt TEC riser, for a lightweight, hard-hitting, buck-dropping rig.

Big on technology and easy on the wallet, the PowerMax delivers maximum power, accuracy and feel with a minimum price tag.

Every model of bow riser Hoyt designs is required to survive 1,500 dry fires without failure before ever being considered for the Hoyt product line. This is NOT an industry standard. This is the Hoyt standard. Outsiders tell Hoyt their testing standards are overkill, they obviously don't know the type of durability and dependability serious bowhunters expect and need.

With performance like that it's tough to pass up such a well priced Hoyt!

As part of your bow purchase, you receive a Hoyt promo kit comprising

• An 18 page Owner's Manual
• Hoyt Decal
• Warranty Registration Card
• Hoyt Wrist Band
• Hoyt Cap

Specs at a glance

• ATA Speed 328fps
• Weight range 50-60lbs
• Draw length ranges 25.5"-30"
• Brace height 6.75"
• Axle to Axle 31"
• Mass weight 3.8lbs
• Let-Off 75% with generous valley
• PowerMax Cam & a Half delivers smooth speed
• Riser sleek, streamlined TEC-Lite aluminium
• Rotating cam modules allow easy adjustment without module replacement or a bow press
• Limbs ZRX
• ARC Limb technology
• Parallel split limb technology, wide-stance split limbs provide torsional stability
• Multi-layer limb lamination
• Zero Torque Cable Guard system
• Pro Lock Limb Pocket system
• Limb Damper or Limb Shox feature an innovative, custom, five-fin shape, proven in rigorous lab tests to dampen noise and deaden vibration more efficiently than previous Damper designs and ensure whisper-quiet, shock-free performance
• StealthShot string suppression system momentarily captures and suppresses the string, nearly eliminating all string movement and oscillation after the shot. Tests have demonstrated that bows equipped with Hoyt's new StealthShot reduce string oscillation and movement by over 70% and create a much cleaner release of the arrow from the string for a more accurate and forgiving shot to keep your bow whisper quiet
• In-line roller cable guard
• Perfect balance stabilisation system
• Silent shelf technology
• Pro-Fit Custom Grip for a comfortable torque-free grip
• FUSE Strings and Cables

• Available in Left Hand only
• Available in standard hunting colour option of BlackOut (Black Riser, BlackOut Limbs) only

Custom Colour Limb Dampers are available in 8 great accent colours to customise your look. Components are sold individually, or in a custom 10 piece damper kit

Hoyt has left no stone unturned with the value packed PowerMax. Check the PowerMax out today.

Hoyt bows are without a doubt the gold standard for compound bows. But are Hoyt compound bows really worth their price? Read on to find out!

Based in Salt Lake City, Utah, Hoyt Archery is a company which has gained a lot of popularity among archers and bow hunters worldwide. Hoyt was formed in 1942 and since then, it has remained as one of the top bow manufacturers in the world. It’s famous for manufacturing high-quality bows for different types of archery such as 3D shooting, hunting, and competition shooting.

Intro

Every now and then, Hoyt comes up with some great and innovative technology to manufacture great bows which never disappoint the shooters.

However, it is important to point out that this high quality also comes at a very high cost, making these bows perhaps not the best choice for those who are just starting out and just want to find out if bow and arrow is their thing. Additionally, many competitor manufacturers have entered today’s market with great quality compound bows at fraction of the price of the typical high-end Hoyt product.  

In the comparison table below, you’ll find the most popular Hoyt compound bow models available on today’s market.

Hoyt Compound Bows Comparison Table

Compound bow name		Image	Max Speed (FPS)	Riser material	​Price
Hoyt Defiant Pro 34 (2019)			331	Aluminum or Carbon
Hoyt Defiant Turbo (2019)			350	Aluminum or Carbon
Hoyt Carbon RX-1 Turbo ZT (2019)			350	Carbon
Hoyt HyperForce (2019)			340	Carbon

Hoyt Compound Bows VS More Affordable (but equally good) Alternatives

We screened the market for the most sought-after, popular Hoyt bows, and matched their features with those of more affordable, high quality compound bows. These bows can suit both pro archers/hunters that don’t feel like breaking the bank to get a Hoyt bow, and first-timers who just want to find a solid bow to practice with.

Important: To draw a conclusion from these comparisons we’ve obviously taken into account the higher price tag on the Hoyt bows, which ultimately affects the value that you get for your money.

In this first comparison, we’ve chosen is the Hoyt Defiant Pro 34 2017, a really popular shooter available both in aluminum or carbon riser.

The best affordable alternative to the Hoyt Defiant 24 is the PSE Madness 34, matched for AtA lenght,  %let-off and flexibility.

Let’s take a look at this comparison in more detail.

Hoyt Defiant Pro 34 VS PSE Madness 34 Breakdown

1. Features summary

2. Materials & Design

3. Performance

4. Flexibility

5. Final Verdict

1. Features summary

Feature	Hoyt Defiant Pro 34	PSE Madness 34
​
Riser Material	Aluminum/Carbon	Aluminum
Max Speed (FPS)	325	342
%Let-off	80	80
Brace height (inches)	7	6
AtA (inches)	34	34
Draw Length range (inches)	25-31	24.5-30.5
Draw weight range (lbs)	30-80	35-70
Bow weight (lbs)	4.4 (Al) /3.8 (C)	4.1
Where to buy

2. Materials & Design

The Hoyt Pro Defiant 34 It features an aluminum or carbon riser and a one-piece wooden grip that matches the color of the limbs and strings. The wooden grip is easy to hold and sits nicely in place to promote hand placement which in turn improves the accuracy. Needless to say the Hoyt Defiant 34 features Hoyt trademark DFX cams and multilayer laminate Ultra-flex limbs, for superior comfort and accuracy.

The PSE Madness 34 is built on a forged aluminum riser, which is longer than other PSE Madness models. Archers and hunters that prefer a larger grip might find the grip on the PSE Madness a little narrow. the PSE Madness features a hybrid cam technology, which combines the high performance of dual cam with the adjustability of a single cam. Archers that prefer a  solid wall feeling might not love the lack of draw stop on the top cam of the PSE, although the single cable stop still gives a solid back wall feeling.

Winner – Hoyt Defiant 34: superior grip and cam technology

3. Performance

The Hoyt Defiant 34 has a IBOrating of 325fps, while the PSE Madness is faster at 342fps.

The extra speed on the PSE comes at the expense of less forgiveness, as the brace height on the PSE is 6″ against the generous 7″ on the Hoyt. However, the guys over at PSE have explained in detail why the 6” brace height is a non-issue on their bows thanks to the innovative PSE technology. Both bows have 34″ AtA which is great for shooting stability and versatility. Both bows have very smooth draw cycles, but the PSE Precision X-Force technology pushes the Madness a little above the Defiant and even other PSE models for draw dynamics and control.

Winner – PSE Madness 34:faster and smoother

4. Flexibility

Both the Hoyt Defiant Pro 34 and the PSE Madness 34 are available in several different draw weight/length configurations and combinations, to fit shooters of different size and body frames.

At 4.4 lbs bow weight, the aluminum Hoyt Defiant 34 Pro is heavier than the PSE Madness 34 (4.1lbs) and many similar recent hunting bows. This extra weight perhaps makes the Hoyt Defiant 34 a little less field-friendly. However, some bow hunters do prefer a heavier and more solid weapon such as this one to more lightweight bows. If the excess weight on the aluminum Defiant Pro is an issue, the bow is also available in the carbon riser version, which is significantly lighter (3.8lbs), but also more costly.

Winner: Tie

5. Final Verdict

There’s no doubt that if you need a solid and fast bow, capable of 3D shooting, hunting, and target shooting, Hoyt Defiant 34 is your number 1 choice. This compound bow is perfectly designed to do pretty much anything a shooter wants and needs.

But, considering the massive Hoyt price tag, we feel that the PSE has a little edge over the Defiant Pro 34 for performance and value. Paying even more money to get the carbon riser version of the Defiant just for warmer feeling and less total weight is just not worth it.

We recommend the PSE Madness 34 particularly because it has one of the smoothest draw cycles you’ll ever find on a modern bow, thanks to the innovative PSE X-Force technology.

Verdict: Are Hoyt compound bows worth their price?

The state-of-the art manufacturing and technology combined with eye-catching design place Hoyt compound bows among the absolute best in pro archery gear. Yes, they’re expensive, but as everything in life, you get what you pay for. With Hoyt you get impressive durability, power and reliability, features that you definitely need for your next big hunt.

On the other hand, Hoyt has indeed introduced some budget bows in its lineup, but the feeling is that they are not the absolute best compared to some competitors models priced comparably. If you are looking for a good quality compound bow, with a good accessory package at a more affordable price, pick one of our top budget choices featured in this article, or check out our guide to the best compound bows for beginners and pro archers. You will definitely find good entry-level models that will make good hunting and training buddies before upgrading to top grade gear.

More useful compound bow articles

Still haven’t found what you’re looking for? No need to worry! Take a look at some of the most popular compound bow articles below. Oh, and don’t forget to subscribe to our newsletter to never miss on the nest guides and the best compound bow deals!

Did you enjoy this guide?

We hope you enjoyed reading this Hoyt compound bows guide and that you found it useful. If you have any suggestions or comments, do not hesitate to get in touch.

If you liked this guide, why not share it on social media to let your friends and fellow archers know!