Easton axis

Easton® Axis® N-Fused® 400 with 2" XPV Vane (6 Pack)

Easton®

A favorite choice for serious bowhunters looking for deep penetrating big game performance. AXIS carbon arrows deliver the extreme penetration of micro-diameter carbon, while Hidden Insert Technology aligns broadheads for greater accuracy.

Notify me when the price drops

Full Details

A favorite choice for serious bowhunters looking for deep penetrating big game performance. AXIS carbon arrows deliver the extreme penetration of micro-diameter carbon, while Hidden Insert Technology aligns broadheads for greater accuracy.

  • Factory crested
  • Pre-installed green X Nock
  • X HIT conventional thread inserts - compatible
  • Deep Six RPS steel inserts - compatible
  • Deep Six steel points - sold separately
  • Deep Six broadheads - sold separately
  • Brass x HIT conventional thread break-off inserts - sold separately
  • High-strength carbon-composite fibers
  • Straightness: ± .003

Specifications

Product NameEaston® Axis® N-Fused® 400 with 2" XPV Vane (6 Pack)
ClearanceNo
Manufacturer SKU619389
UPC723560193899
BrandEaston
TypeHunting Arrow
ISPU OnlyNo
Store PickupYes

Store Availability

See Availability of this product in stores.

Reviews

Sours: https://www.runnings.com/eastonr-axisr-n-fusedr-400-with-2-xpv-vane-6-pack.html

Easton Axis® Traditional™ Carbon Shafts

These quality, attractive carbon shafts are inspired by Doug Easton's 1920's handmade wood arrows. Features a PhotoFusion™ wood-grain finish. Heavy weight, micro X diameter for deeper penetration. Aluminum HIT inserts allow more tuning and better broadhead alignment. Constructed of N-FUSED® carbon nano-tubes to increase strength and reduce vibration. Bone color nocks.

Comes with Aluminum HIT Inserts (not installed.) If you prefer HIT Break Off Brass Inserts 50-75 gr, you can order them separately.

Available in 700, 600, 500, 400, and 340. Sold by the 6-pack or the dozen. Please specify.

Axis Traditional Carbon Shafting Specifics
SpinePointGPILengthInsertNockCarbon
Collar
Nock
Collar
7009/32"6.832"16 grXE (loose fit)--
6009/32"7.930½"16 grXE--
5009/32"8.931"16 grXF--
4009/32"9.831½"16 grXF--
3409/32"10.332"16 grXG--
Straightness      ±.003"        Weight    ±2 grains          Length  ±½"

PLEASE NOTE: Any service requested may delay shipment. Items with services applied are non-refundable.

Services Available
Cut Shafts to Length:  Have your carbon arrows cut to length. The length is measured from the throat of the nock to the back of the point. Minimum length is 27½".

Install Inserts:  Choose this option to have our experts install the included point inserts in your shafts. Please Note: If you select this service without selecting the "Cut to Length" service, your shafts will be cut to the stock length (as specified in the chart above). Please Note: We use epoxy style adhesives on all inserts and most points. Once they are installed, they are permanent.

If you prefer to customize your shaft with additional options, please use our Arrow Builder

See Printable Shaft Selection Chart PDF

Warning: Cancer and Reproductive Harm
www.P65Warnings.ca.gov

Sours: https://www.3riversarchery.com/mm5/
  1. D7g for sale
  2. Chive humor
  3. 2021 honda pilot consumer reviews

Field Test: Easton Axis 4MM Long Range

During my 20 years in the outdoor industry, I’ve witnessed a pile of incredible arrow builds. Most of those builds have come from arrow-mastermind Easton. From arrows designed for speed to carbon shafts wrapped in a penetration-boosting metal jacket, the hits keep on coming.

A tried-and-true staple in the lineup and a quiver-filler for throngs of archers, the Axis ranks as one of the finest shafts ever created. Why? Side of filling thousands of freezers and making massive taxidermy bills, this arrow is a do-all. The 5MM build is micro, which means the shaft can buck the wind and find its mark even at extended distances. Plus, the micro-profile focuses kinetic energy into the frontal area, which creates less friction and ensures maximum penetration. Then there’s the fact the arrow is offered in seven spine sizes, meaning most any archer can pair the Axis with their stick-and-string setup. Bottom line: The Axis is a durable, accurate and dependable big-game wrecker that countless bowhunters put their trust in. It just doesn’t get any better.

Or does it?

Enter the Axis 4MM Long Range. I could hear the excitement in Easton’s Gary Conrnum’s voice as he gave me the 411 on this new-for-2021 arrow. Cornum is an arrow guru, and when he gets pumped about a product, people should take note.

“It’s our best Axis build to date,” he said. “Now Axis lovers can get a super micro-diameter shaft with a front-of-center boosting aluminum point outsert that has standard 8-32 threads. This arrow is as accurate as they come and delivers incredible downrange penetration.”

True to Form

The literature I’d read and my conversation with Cornum had my mind buzzing, and when my Axis 4MM Long Range bare shafts arrived, I couldn’t wait to put them through the paces. The 100-percent carbon cut with ease, and the aluminum point half-out outserts glued in without hassle. The outsert measures just a tick over an inch, so if you’re cutting your arrows, be sure and compensate for this. If you shoot a 29-inch arrow, you’ll want to cut your 4MM shafts at 28-inches if you plan to use the included aluminum half-out outsert.

This was my first Axis build that didn’t require the use of Easton’s chamfering stone, HIT Epoxy, and HIT Insert Tool. Instead, I used 91 Isopropyl Alcohol to clean the inside of the shafts, applied insert glue to my aluminum outserts, and twisted them into the shaft to distribute the glue evenly to the inner shaft wall. The process is super simple and saves a lot of time. The fletching process was a breeze as well. I opted not to use wraps, and my AAE Hybrid 23 vanes grabbed the carbon wonderfully.

With my 4MM Long Range soldiers ready to fly, I first conducted a speed test. Tipping the scale at 405.5 grains, my 28 ¾-inch 4MM Axis Long Range arrows powered by Hoyt’s Ventum 33 set at 68 pounds of draw weight and a 29-inch draw length propelled shafts at an average speed of 302 fps. Plenty fast, and my kinetic energy rating was an impressive 82-foot pounds. The ACU-Carbon build blended with the aluminum half-out outsert system ups velocity and helps the arrow deliver more energy downrange. Plus, each shaft passed the spin test and popped perfect bullet holes through paper after a bit of rest adjusting. More impressive was the accuracy factor. From distances between 20 and 100 yards, my four-fletched arrows found the mark.

For a week, I shot the Axis 4MM Long Range in crosswinds, tailwinds and headwinds, and there’s no question the shaft’s ultra-micro diameter build resists side-to-side wind drift. I also shot fixed and mechanical broadheads out to 100 yards. My fixed-blade heads hit a tad right of the mark starting at 50 yards, which is normal, but even though they were a tad right, each fixed-blade shaft grouped. The SEVR 2.0 mechanical-tipped shafts hit right with my field points out to 100 yards. The 4MM MicroLite Nocks are tough; attach brilliantly to the string and leave it cleanly. After the tuning process, I detected zero nock travel. Warning! Shooting groups with these shafts, especially with fixed-blade broadheads, is not advised. The Axis 4MM Long Range is without a doubt the most accurate arrow I’ve ever fired, and unless you have unlimited funds and lots of time to build arrows, I would suggest shooting individual spots.

Satisfied with the accuracy of the arrow, I moved on to some penetration tests. I received the arrows late in the spring, and with turkey tags punched and no bear hunts on the horizon, I used a new Block foam target to conduct a few penetration tests. With a calculated F.O.C. of precisely 12.6 percent, my Axis 4MM Long Range arrows drove deeper into foam when shot head-to-head against my standard 5MM Axis arrows. It’s important to note that bowhunters should shoot for an F.O.C. between 11 and 18 percent. I have no doubt the optimized F.O.C. build blended with the arrows speed and micro-diameter construction will lead to big-game pass-throughs, even at extended distances.

Those who favor the HIT system blended with Deep Six technology can separately purchase 4MM Deep Six Steel HIT Inserts (20 grains). If you’re looking to up arrow weight and increase your F.O.C. but want to stay with the outsert system, 4MM Titanium Half-Out Inserts (55 grains) can also be had for a few more greenbacks. The Axis 4MM Long Range is available in spine sizes of 250, 300, 340 and 400, and straightness ratings of +/- .003” and +/- .001” can be purchased. The Axis 4MM Long Range can be purchased by the dozen (bare) or half-dozen (fletched).

If you’re looking for a do-all hunting arrow that will perform at extended distances on medium-sized and large big-game animals like elk, moose and grizzly, the Easton Axis 4MM should line your quiver come fall.

Sours: https://bornhunting.com/field-test-easton-axis-4mm-long-range/

Easton 5MM Axis Dozen Arrow Shafts

Product Description

A favorite choice for serious bowhunters looking for deep-penetrating big game performance. The Easton Axis Arrow Shafts deliver the extreme penetration of micro-diameter carbon, while Hidden Insert Technology aligns broadheads for tighter groups. The Easton Axis 5mm arrows have a micro-smooth finish making them a dream to pull out of 3D targets. With the X diameter Easton Axis Arrow Shafts, you will get up to 24% more Kinetic Energy then a standard arrow and dramatically reduces wind drift. Smaller diameter is the way to go if your looking for the ultimate performance for a hunting arrow. With the wide selection of spines you can find the perfect Easton Axis arrow to cater for your hunting needs.

  • Delivers more accuracy than any other broadhead insert.
  • Provides full contact between broadhead shank and shaft wall for added strength and tighter groups.
  • Uses ultra-small diameter arrow shafts to deliver more kinetic energy and penetration power.
  • Features easy, precise installation. Patent-pending insert system.
  • Deeper penetration
  • Dramatically reduces wind drift
  • 24% more KE Density
Sours: https://www.blackovis.com/easton-5mm-axis-infused-arrow-shafts

Axis easton

She fought back, squealed, but in reality she was simply unable to do something with the man. I crucified her very quickly and after that I undressed, throwing my things on the floor. She was still indignant, but I threatened that. I would put my panties in my mouth if she didnt shut up. And even, to prove his intentions, he threw his panties on his face.

Gloomy thoughts, like a herd of horses, rushed through my head. With shaking fingers he felt the body again. It was warm.

Now discussing:

Of course, I was inferior to her in everything, I loved her very much. And this time, she insisted to go to the resort without me with a friend. I understood that such a bright Woman would not be alone with her friend at the resort, but I showed weakness.



523 524 525 526 527